Service Issues Form Specifications.

Rev. Proc. 2003-30

.01 The purpose of this revenue procedure is to provide general rules and specifications of the Internal Revenue Service (IRS) and the Social Security Administration (SSA) for paper substitute forms for Form W-2, Wage and Tax Statement, and Form W-3, Transmittal of Wage and Tax Statements, for wages paid during the 2003 calendar year.

.02 For purposes of this revenue procedure, a substitute form is one that is not printed by the IRS. A substitute Form W-2 or W-3 must conform to the specifications in this revenue procedure to be acceptable to the IRS and the SSA. No IRS office is authorized to allow deviations from this revenue procedure. Preparers should also refer to the separate 2003 Instructions for Forms W-2 and W-3 for details on how to complete these forms. See Part C, Section 4, for information on obtaining the official IRS forms and instructions. See Part B, Section 2, for requirements for the copies of substitute forms furnished to employees.

.03 The IRS maintains a centralized call-site at its Martinsburg Computing Center (IRS/MCC) to answer questions related to information returns (Forms W-2, W-3, 1099 series, 1096, etc.). You can reach the call-site at 304-263-8700 (not a toll-free number) or 1-866-455-7438 (toll-free). The Telecommunication Device for the Deaf TDD) number is 304-267-3367 (not a toll free number). The hours of operation are Monday through Friday from 8:30 A.M. to 4:30 P.M. Eastern Time. You may also send questions to the call-site via the Internet at mccirp@irs.gov. IRS/MCC does not process Forms W-2. Forms W-2 prepared on paper and/or magnetically/electronically must be filed with the SSA. IRS/MCC does, however, process waiver requests (Form 8508, Request for Waiver From Filing Information Returns on Magnetic Media) and extension of time to file requests (Form 8809, Request for Extension of Time To File Information Returns) for Forms W-2 and requests for an extension of time to furnish the employee copies of Form W-2. See Pub 1220, Specifications for Filing Forms 1098, 1099, 5498 and W-2G Magnetically or Electronically, for information on waivers and extensions of time.

.04 The following publications provide detailed filing procedures for certain information returns:

• 2003 Instructions for Forms W-2 and W-3,

• Instructions for Forms W-2c and W-3c (Rev. December 2002), and

• Pub 1223,General Rules and Specifications for Substitute Forms W-2c and W-3c.

.01 Because there were few changes to the format of Forms W-2 and W-3 since the last revision of Pub. 1141, most of the changes to this document are editorial in nature.

.02 Redundancies were eliminated as much as possible.

.03 The IRS plans to change the dimensions of the 2004 Forms. W-2 and W-3 to match those shown for laser-printed forms in Exhibits E and F. Details will be posted under "What's Hot in Tax Forms, Pubs, and Other Tax Products" on the IRS web site at www.irs.gov/formspubs.

.04 The web address for the Social Security Administration has changed to www.socialsecurity.gov

.05 The 4-digit vendor code on the laser-printed Forms W- 2, W-3 must be preceded by four zeros and a slash (0000/).

Section 3. General Rules for Filing Forms W-2 or W-3 Magnetically or Electronically

.01 Employers must file Forms W-2 (Copy A) with the SSA electronically or with magnetic media if they file 250 or more calendar year 2003 Forms W-2 (Copy A). The SSA publication MMREF-1, Magnetic Media Reporting and Electronic Filing, contains specifications and procedures for filing Form W-2 information with the SSA magnetically or electronically. Employers are cautioned to obtain the most recent revision of MMREF-1 (and supplements) due to any subsequent changes in the specifications and procedures.

.02 You may obtain a copy of the MMREF-1 by: ò

• Writing to:

• Social Security Administration

   

  OCO, DES; Attn: Employer Reporting Services Center

   

  300 North Greene Street

   

  Baltimore, MD 21290-0300

   

• Accessing the SSA web site at www.socialsecurity.gov/employer.

• Calling your local SSA Employer Service Liaison Officer (ESLO) (the ESLOs' telephone numbers are available at www.socialsecurity.gov/employer) or by calling 1-800- 772-6270, or

• Using the SSA Business Services Online (BSO) at www.socialsecurity.gov/employer.

.04 Employers who do not comply with the magnetic media or electronic filing requirements for Form W-2 and who are not granted a waiver may be subject to penalties. Employers who mailed Form W-2 information with the SSA on magnetic media or electronically must not send the same data to the SSA on paper Forms W-2. Any duplicate reporting may subject filers to unnecessary contacts by the SSA or IRS.

Section 4. General Rules for Paper Forms W-2 And W-3

.01 Employers not filing magnetically or electronically must file a paper Form W-2 (Copy A) and Form W-3 with the SSA using either the official IRS form or a substitute form that exactly meets the specifications shown in Parts B and C of this revenue procedure.

Note: Substitute territorial forms (W-2GU, W-2VI, W-2AS) should also conform to the specifications as outlined in this revenue procedure. These forms require the form designation ("W-2AS, " "W-2GU," "W-2VI") on Copy A to be in black ink.

Employers who file with the SSA magnetically, electronically, or on paper may design their own statements to furnish to employees. These employee statements designed by employers must comply with the requirements shown in Parts B and C.

.02 Red-ink substitute forms that completely conform to the specifications contained in this revenue procedure may be privately printed without prior approval from the IRS or the SSA. Forms cannot be submitted to the IRS or the SSA for specific approval, except for the black-and-white laser-printed forms submitted to SSA for initial approval (see Section 1B of Part B).

.03 Substitute forms filed with the SSA and substitute copies furnished to employees that do not conform completely to these specifications are unacceptable. Forms W-2 (Copy A) and W-3 filed with the SSA that do not conform may be returned. In addition, penalties may be assessed for not complying with the form specifications.

.04 If you are uncertain of any specification and want it clarified, submit a letter citing the specification, state your interpretation of that specification, and enclose an example (if appropriate) of how the form would appear if produced using your understanding of the specification.

.05 Any questions about the red-ink Form W-2 and Form W-3 should be sent to:

.06 Forms W-2 and W-3 are subject to annual review and possible change. Therefore, employers are cautioned against overstocking supplies of privately-printed substitutes.

.07 Separate instructions for Forms W-2 and W-3 are provided in the 2003 Instructions for Forms W-2 and W-3. Form W-3 should be used only to transmit paper Forms W-2 (Copy A). Form W- 3 is a single sheet including only essential filing information. Be sure to make a copy of your completed Form W-3 for your records. Copies of the current year official IRS Forms W-2 and W- 3, and the instructions for those forms may be obtained from most IRS offices or by calling 1-800-829-3676. The IRS provides only cutsheet sets of Forms W-2 and cutsheets of Form W-3. The instructions and information copies of the forms may be found on the IRS web site at www.irs.gov.

.08 Because substitute Forms W-2 (Copy A) and W-3 are machine-imaged and scanned by the SSA, the forms must meet the same specifications as the official IRS Forms W-2 and W-3 (as shown in the exhibits).

.01 The official, IRS-printed red drop-out ink Form W-2 (Copy A) and W-3 and their exact substitutes are referred to as "red-ink." Employers may file substitute Forms W-2 and W-3 with the SSA. The substitute forms must be exact replicas of the official IRS forms with respect to layout and content because they will be read by scanner equipment.

.02 Paper used for substitute Form W-2 (Copy A) and Form W-3 (cutsheets and continuous-pinfed forms) that are to be filed with the SSA must be white 100% bleached chemical wood, 18-20 pound paper only, optical character recognition (OCR) bond produced in accordance with the specifications shown as follows:

• Acidity: Ph value, average, not less than 4.5

• Basis Weight: 17 x 22 inch 500 cut sheets, pound. 18-20

• Metric equivalent-gm./sq. meter (a tolerance of +5 pct. Is allowed) 68-75

• Stiffness: Average, each direction, not less than - milligrams

• Cross direction 50

  Machine direction 80

• Tearing strength: Average, each direction, not less than- grams 40

• Opacity: Average, not less than-percent 82

• Reflectivity: Average, not less than-percent 68

• Thickness: Average-inch 0.0038

• Metric equivalent-mm 0.097

  (a tolerance of +0.0005 inch (0.0127 mm) is allowed) Paper cannot vary more than 0.0004 inch (0.0102 mm) from one edge to the other.

• Porosity: Average, not less than-seconds 10

• Finish (smoothness): Average, each side-seconds 20-55

• (for information only) the Sheffield equivalent-units. 170-d200

• Dirt: Average, each side, not to exceed-parts-per million 8

.03 All printing of substitute Forms W-2 (Copy A) and W-3 must be in Flint red OCR dropout ink except as specified below. The following must be printed in nonreflective black ink:

• Identifying number "22222" or "33333" at the top of the forms.

• Tax year at the bottom of the forms using 24-point OCR-A font.

• The four (4) corner register marks on the forms.

• The jurat and "Signature, Title, Date" line at the bottom of Form W-3.

• The form identification number ("W-3") at the bottom of Form W-3.

• All the instructions below Form W-3 beginning with "Send this entire page . . . line to the bottom of Form W-3.

.05 The vertical and horizontal spacing for all federal payment and data boxes on Forms W-2 and W-3 must meet specifications. On Form W-3 and Form W-2 (Copy A), all the perimeter rules must be 1-point (0.0 14-inch), while all other rules must be one-half point (0.007-inch). Vertical rules must be parallel to the left edge of the form; horizontal rules parallel to the top edge.

.06 Employers filing Forms W-2 (Copy A) with the SSA on paper must also file a Form W-3. Form W-3 must be the same width (8.0 inches) as the Form W-2. One Form W-3 is printed on standard-size, 8.5 x 11 -inch paper. Two official Forms W-2 (Copy A) are contained on a single page that is 8.5 inches wide by 11 inches deep (exclusive of any snap-stubs). The official red-ink Form W-3 and Form W-2 (Copy A) are 8.0 inches wide.

.07 The top margin for the Form W-2 (Copy A) and Form W-3 is .375 inches (3/8 inch). The right margin must be .2 inches and the left margin is .3 inches (plus or minus .0313 inches). Margins must be free of all printing.

.08 The identifying numbers are "22222" for Form W-2 (Copies A and 1) and "33333" for Form W-3. No printing should appear anywhere near the identifying numbers. For both Form W-2 (Copy A) and Form W-3, the combination width of box a (Control number) and the box containing the identifying number (22222) must always be 2.54 inches.

Note: The identifying number must be printed in nonreflective black ink in OCR-A font of 10 characters per inch.

.09 The depth of the individual scannable image on a page must be the same as that on the official IRS forms. For Form W-2, the total depth of an individual form must be 4.94 inches. The depth of the Form W-3 on a page must be 4.8 inches.

.10 Continuous-pinfed Forms W-2 (Copy A) must be separated into 11-inch deep pages. The pinfed strips must be removed when Forms W-2 are filed with the SSA. The two Copies A of Form W-2 on the 11-inch page must not be separated (only the pages are to be separated (burst)). The words "Do Not Cut, Fold, or Staple Forms on This Page" must be printed twice between the two Copies A in Flint red OCR dropout ink. Perforations are required on all other copies (Copies 1, B, C, 2, and D) to enable the separation of individual forms.

.11 Box 12 of Form W-2 (Copy A) contains four entry boxes 12a, 12b, 12c, and 12d. Do not make more than one entry per box. Enter your first code in box 12a (i,e., enter Code D in box 12a, not 12d, if it is your first entry). If more than four items need to be reported in box 12, use a second Form W-2 to report the additional items (see "Multiple forms" in the 2003 Instructions for Forms W-2 and W-3). Do not report the same federal tax data to the SSA on more than one Form W-2 (Copy A). However, repeat the identifying information (employer's name, address, and EIN) on each additional form.

.12 The checkboxes in box 13 of Form W-2 (Copy A) must be .14 inches each; the spacing on each side of the 3 checkboxes is .36 inches; the space after the 3rd checkbox is .46 inches (see Exhibit A). The checkboxes in box b of Form W-3 must be .13 inches (see Exhibit B).

Note: More than 50% of an applicable checkbox must be covered by an "X".

.13 All substitute Forms W-2 (Copy A) and W-3 in the red- ink format must have the tax year, form number, and form title printed on the bottom face of each form using identical type to that of the official IRS form. The red-ink substitute Form W-2 (Copy A) and Form W-3 must have the form producer's EIN entered to the left of "Department of the Treasury."

.14 The words "For Privacy Act and Paperwork Reduction Act Notice, see separate instructions," must be printed in Flint red OCR dropout ink in the same location as on Form W-2 (Copy A). The 2003 Instructions for Forms W-2 and W-3 contain the Privacy Act Notice previously shown on the Form W-3.

.15 The Office of Management and Budget (OMB) Number must be printed on substitute Form W-3 and on each ply of substitute Form W-2 in the same location as the official IRS forms.

.16 All substitute Forms W-3 must include the instructions that are printed on the same sheet below the official IRS form.

.17 The back of substitute Form W-2 (Copy A) and Form W-3 must be free of all printing.

.18 All copies must be clearly legible. Hot wax and cold carbon spots are not permitted for Form W-2 (Copy A). Interleaved carbon should be black and must be of good quality to assure legibility on all copies and to avoid smudging. Fading must be minimized to assure legibility.

.19 Chemical transfer paper is permitted for Form W-2 (Copy A) only if the following standards are met:

• Only chemically-backed paper is acceptable for Form W-2 (Copy A). Front and back chemically-treated paper cannot be processed properly by scanning equipment.

• Chemically-transferred images must be black.

• Carbon-coated forms are not permitted.

Section 1B. Specifications for "Laser-Printed" Substitute Form W-2 (Copy A) and Form W-3 Filed With the SSA

.01 The SSA-approved, laser-printed, black-and-white Forms W-2 (Copy A) and W-3 are referred to as "laser-printed." Specifications for the laser-printed black-and-white Forms W-2 (Copy A) and W-3 are similar to the red-ink forms (Part B, Section 1A) except for the following items and the actual form dimensions (in Exhibits E and F). Exhibits are samples only and must not be downloaded to meet tax obligations.

•  

  1. Forms must be printed on 8.5 x 11-inch single-sheet paper only, not on continuous-feed using a laser printer. There must be two Forms W-2 printed on a page. There must be no horizontal perforations between the two Copies A of Form W-2 on each page.

  2. All forms and data must be printed in nonreflective black ink only.

  3. The data and forms must be programmed to print simultaneously. Forms cannot be produced separately from wage data entries.

  4. The forms must not contain corner register marks.

  5. The forms must not contain any shaded areas including those boxes that are entirely shaded on the red-ink forms.

  6. Identifying numbers on both Form W-2 (22222) and Form W-3 (33333) must be preprinted in 14-point Arial bold font.

  7. The form numbers ("W-2" and "W-3") must be in 18-point Arial font. The tax year ("2003") on Forms W-2 and W-3 must be in 20- point Arial font.

  8. No part of the box titles or the data printed on the forms may touch any of the vertical or horizontal lines, nor should any of the data intermingle with the box titles. The data should be centered in the boxes.

  9. Do not print any information in the margins of the laser- printed forms (i.e., do not print "DO NOT STAPLE OR FOLD" in the top margin of Form W-3).

  10. The word "Code" must not appear in box 12 on Form W-2 (Copy A).

  11. A 4-digit vendor code preceded by four zeros and a slash (i.e., 0000-1234) must appear in 12-point Arial font under the tax year in place of the Cat. No. on Form W-2 (Copy A) and in the bottom right corner of the "For Official Use Only" box at the bottom of Form W-3. Do not display the form producer's EIN to the left of "Department of the Treasury." The vendor code will be used to identify the form producer.

  12. Do not print Catalog Numbers (Cat. No.) on either form (10134D for Form W-2; 10159Y for Form W-3).

  13. Do not print the checkboxes in:

• Box b of Form W-3. The "X" should be programmed to be printed and centered directly below the applicable "Kind of Payer."

• The "Void" box of Form W-2 (Copy A). The "X" should be programmed to be printed to the right of "Void" because of space limitations.

• Box 13 of Form W-2 (Copy A). The "X" should be programmed to be printed and centered directly below the applicable box title.

.02 You must submit samples of your laser-printed substitute forms to the SSA. Only laser-printed, black-and-white substitute Forms W-2 (Copy A) and W-3 for tax year 2003 will be accepted for approval by the SSA. Questions regarding other forms (i.e.; Forms W-2c, W-3c, 1099 series, 1096, etc.) must be directed to the IRS.

.03 You will be required to send one set of blank and one set of dummy-data, laser-printed substitute Forms W-2 (Copy A) and W- 3. Sample data entries should be filled in to the maximum length for each box entry using numeric data or alpha data depending upon the type being entered. Include in your submission the name, telephone number, fax number, and e-mail address of a contact person who can answer questions regarding your sample forms.

.04 To receive approval, you may first contact the SSA at laser.forms@ssa.gov to obtain a template and further instructions in pdf or Excel format. You may also send your 2003 sample, laser-printed substitute forms to:

.05 The 4-digit vendor code preceded by four zeros and a slash (0000/) must be preprinted on the sample, laser-printed substitute forms. Forms not containing a vendor code will be rejected and will not be submitted for testing or approval. If you do not have a vendor code, you may contact the National Association of Computerized Tax Processors via e-mail at president@nactp.org.

.06 If you use forms produced by a vendor and have questions, concerning approval, do not send the forms to the SSA for approval. Instead, contact the software vendor to obtain a copy of SSA's dated approval notice supplied to that vendor.

Section 2. Requirements for Substitute Forms Furnished to Employees (Copies B, C, and 2 of Form W-2)

.01 All employers (including those who file on magnetic media or electronically) must furnish employees with at least two copies of Form W-2 (three or more for employees required to file a state, city, or local income tax return). The following rules are guidelines for preparing employee copies.

The dimensions of these copies (Copies B, C, and 2), but not Copy A, may differ from the dimensions of the official IRS form to allow space for reporting additional information, including additional entries such as withholding for health insurance, union dues, bonds, or charity in box 14. The limitation of a maximum of four items in box 12 of Form W-2 applies only to Copy A that is filed with the SSA.

Note: Printers are cautioned that the rules in Part B, Section 2 apply only to employee copies of Form W-2 (Copies B, C, and 2). Paper filers who send Forms W-2 (Copy A) to the SSA must follow the requirements in Part B, Sections 1A and 1B.

.02 The minimum allowable dimensions for employee copies only (not Copy A) of Form W-2 are 2.67 inches deep by 4.25 inches wide. The maximum allowable dimensions are no more than 6.5 inches deep by no more than 8.5 inches wide.

Note: The maximum and minimum size specifications are for tax year 2003 only and may change in future years.

.03 Either horizontal or vertical format is permitted (see Exhibit D).

.04 The paper for all copies must be white. The substitute Form W-2 (Copy B), which employees are instructed to attach to their federal income tax return, must be at least 12-pound paper (basis 17 x 22-500).

.05 Employee copies of Form W-2 (Copies B, C, and 2), including those that are printed on a single sheet of paper, must be easily separated. Including perforations between the individual copies satisfies this requirement, but using scissors to separate Copies B, C, and 2 does not.

.06 Interleaved carbon and chemical transfer paper employee copies must be clearly legible. Hot wax and cold- carbon spots are not permitted for employee copies. All copies must be able to be photocopied. Interleaved carbon should be black and must be of good quality to assure legibility on all copies and to avoid smudging. Fading must be minimized to assure legibility.

.07 The electronic tax logo on the IRS official employee copies is not required on any of the substitute form copies. To avoid confusion and questions by employees, employers are encouraged to delete the identifying number (22222) and the word "Void" and its associated checkbox from the employee copies of Form W-2.

.08 All substitute employee copies must contain the boxes, box numbers, and box titles that, when applicable, match the official IRS Form W-2. However, certain core information is required. The placement, numbering, and size of this information is specified as follows:

• The items and box numbers that constitute the core data are:

• Box 1 - Wages, tips, other compensation,

  Box 2 - Federal income tax withheld,

  Box 3 - Social security wages,

  Box 4 - Social security tax withheld,

  Box 5 - Medicare wages and tips, and

  Box 6 - Medicare tax withheld.

• The core data boxes (1 through 6) must be placed in the upper right of the form. Substitute vertical-format copies may have the core data across the top of the form (see Exhibit D). In no instance, will boxes or other information be permitted to the right of the core data.

• The form title, number, or copy designation (B, C, or 2) may be at the top of the form. Also, a reversed or blocked-out area to accommodate a postal permit number or other postal considerations is allowed in the upper-right.

• Boxes 1 through 6 must each be a minimum of 1-3/8 inches wide x 1/4 inch deep.

• Other required boxes are:

• b) Employer identification number (EIN),

  c) Employer's name, address, and ZIP code,

  d) Employee's social security number,

  e) Employee's name, and

  f) Employee's address and ZIP code.

Note: Box a ("Control number') is not required.

.09 All copies of Form W-2 must clearly show the form number, the form title, and the tax year prominently displayed together in one area of the form. The title of Form W-2 is "Wage and Tax Statement." It is recommended (but not required) that this be located on the bottom left of Form W-2. The reference to the "Department of the Treasury-Internal Revenue Service" must be on all copies of Form W-2 provided to the employee. It is recommended (but not required) that this be located on the bottom right of Form W-2.

.10 If the substitute employee copies are labeled, the forms must contain the applicable description:

• "Copy B, To Be Filed With Employee's FEDERAL Tax Return.

• "Copy C, for EMPLOYEE'S RECORDS."

• "Copy 2, To Be Filed With Employee's State, City, or Local Income Tax Return."

.11 The tax year (2003) must be clearly printed in nonreflective black ink on all copies of substitute Form W-2. It is recommended (but not required) that this information be in the middle at the bottom of the Form W-2. The use of 24-pt. OCR-A font is recommended (but not required).

.12 Boxes 1, 2 , and 9 (if applicable) on Copy B must be outlined in bold 2-point rule or highlighted in some manner to distinguish them. If "Allocated tips" are being reported, it is recommended (but not required) that box 8 also be outlined. If reported, "Social security tips" (box 7) must be shown separately from "Social security wages" (box 3).

Note. Boxes 8 and 9 may be omitted if not applicable.

.13 If employers are required to withhold and report state or local income tax, the applicable boxes are also considered core information and must be placed at the bottom of the form. State information is included in:

• Box 15 (State, Employer's state ID number)

• Box 16 (State wages, tips, etc.)

• Box 17 (State income tax)

• Box 18 (Local wages, tips, etc.)

• Box 19 (Local income tax)

• Box 20 (Locality name)

.15 Employers may enter more than four codes in box 12 of Copies 1, B, C, 2, and D of Form W-2, but each entry must use Codes A-V (see the 2003 Instructions for Forms W-2 and W- 3).

.16 If an employer has employees in any of the three categories in box 13, all checkboxes must be shown and the proper checkmark made when applicable.

.17 Employers may use box 14 for any other information that they wish to give to their employees. Each item must be labeled. (See the instructions for box 14 in the 2003 Instructions for Form W-2 and W-3)

.18 The front of Copy C of a substitute Form W-2 must contain the note "This information is being furnished to the Internal Revenue Service. If you are required to file a tax return, a negligence penalty or other sanction may be imposed on you if this income is taxable and you fail to report it."

.19 Instructions similar to those contained on the back of Copies B and C of the official IRS Form W-2 must be provided to each employee. An employer may modify or delete instructions (i.e., removing Railroad Retirement Tier 1 and Tier 2 compensation information for nonrailroad employees or information about dependent care benefits that the employer does not provide) that do not apply to its employees.

.20 Employers must notify their employees who have no income tax withheld that they may be able to claim a tax refund because of the earned income credit (EIC). They will meet this notification requirement if they furnish a substitute Form W-2 with the EIC notice on the back of Copy B, IRS Notice 797, Possible Federal Tax Refund Due to the Earned Income Credit (EIC), or on their own statement containing the same wording. They may also change the font on Copy C so that the EIC notification and Form W-2 instructions fit entirely on the back. For more information about notification requirements, see Notice 1015, Have You Told Your Employees About the Earned Income Credit (EIC)?

.01 If magnetic or electronic media is not used for filing with the SSA, the substitute copies of Forms W-2 (either red- ink or laser-printed) should be assembled in the same order as the official IRS Forms W-2. Copy A should be first, followed sequentially by perforated sets (Copies 1, B, C, 2, and D).

.02 The substitute form to be filed by the employer with the SSA must carry the designation "Copy A."

Note: Magnetic media/electronic filers do not submit paper Copy A (red-ink or laser-printed) of Form W-2 or Form W-3 (red-ink or laser-printed) to the SSA.

.03 Substitute forms (red-ink or laser-printed) do not require a copy to be retained by employers (Copy D). However, employers must be prepared to verify or duplicate the information if it is requested by the IRS or the SSA. Paper filers who do not keep a Copy D should be able to generate a facsimile of Copy A in case of loss.

.04 Except for copies in the official assembly, no additional copies that may be prepared by employers should be placed ahead of Form W-2 (Copy C) "For EMPLOYEE'S RECORDS."

.05 Instructions similar to those contained on the back of Copies B and C of the official IRS Form W-2 must be provided to each employee. These instructions may be printed on the back of the substitute Copies B and C or may be provided to employees on a separate statement. Do not print these instructions on the back of Copy 1 or 2 that is to be filed with the employee's state, city, or local income tax return. Any Forms W-2 (Copy A) and W-3 that are filed with the SSA must have no printing on the reverse side. Instructions similar to those provided as part of the IRS official forms must be provided as part of any substitute Form W-2 (Copy A) or Form W-3.

Section 2. Instructions For Employers

.01 Only originals of Form W-2 (Copy A) and Form W-3 may be filed with the SSA. Carbon copies and photocopies are unacceptable.

.02 Employers should type or machine-print data entries on non. laser-generated forms whenever possible. Ensure good quality by using a high-quality type face, inserting data in the middle of blocks that are well separated from other printing and guidelines, and taking any other measures that will guarantee clear, sharp images. Black ink must be used with no script type, inverted font, italics or dual-case alpha characters.

Note: 12-point Courier font is preferred by the SSA. 2003-17 I.R.B.

.03 Form W-2 (Copy A) requires decimal entries for wage data. Dollar signs are preformatted on red-ink Forms W-2 (Copy A) and W-3 and should not be entered as part of money amounts. Dollar signs should not be printed with money amounts on the black-and-white laser-printed Forms W-2 (Copy A) and W-3.

.04 The employer must provide a machine-scannable Form W- 2 (Copy A). The employer must also provide payee copies (Copies B, C, and 2) that are legible and able to be photocopied (by the employee). Refrain from printing any data in the top margin of the form.

.05 Any printing in box a (Control number) on Forms W-2 or W-3 may not touch any vertical or horizontal lines and should be centered in the box.

.06 The filer's employer identification number (EIN) must be entered in box b of Form W-2 and box e of Form W-3.

Note: The EIN entered on Form(s) W-2 (box b) and Form W-3 (box e) must he the same as on Forms 941, 943, CT-1, Schedule H (Form 1040), or any other corresponding forms filed with the IRS.

.07 The employer's name, address, and EIN may be preprinted.

.08 Employers should use the official IRS-preprinted Form W-3 that they received with pub. 393 or Pub. 2184, if available, when filing red-ink Forms W-2 (Copy A) with the SSA.

Section 3. OMB Requirements for Both Red-Ink and Laser-Printed Substitute Forms

.01 The Paperwork Reduction Act (the Act) of 1995 (Public Law 104-13) requires that:

• The OMB approves all IRS tax forms that are subject to the Act.

• Each IRS form contains (in or near the upper right comer) the OMB approval number, if any. (The official of OMB numbers may be found on the official IRS printed forms and are also shown on the forms in Exhibits A, B, E, and F.)

• Each IRS form (or its instructions) states:

• Why the IRS needs the information,

• How it will be used, and

• Whether or not the information is required to be furnished to the IRS.

.02 The OMB requirements for substitute IRS forms are:

• Any substitute form or substitute statement to a recipient must show the OMB number as it appears on the official IRS form.

• For Form W-2 (Copy A) and Form W-3, the OMB number must appear exactly as shown on the official IRS form.

• For any copy of Form W-2 other than Copy A, the OMB number must use one of the following formats.

• 1. OMB No. XXXX-XXXX (preferred) or

  2. OMB # XXXX-XXXX (acceptable).

Section 4. Copies of Forms

.01 You can obtain official IRS forms and information copies of federal tax materials at local offices or by calling the IRS Distribution Center at 1-800-829-3676. Other ways to get federal tax material include:

• The Internet at www.irs.gov.

• IRS Fax Forms at 703-368-9694.

• CD-ROM.

.02 You can access the IRS via the Internet by File Transfer Protocol (FTP) using ftp.irs.gov or by the World Wide Web using www.irs.gov.

.03 The IRS also offers an alternative to downloading electronic files and provides current and prior-year access to tax forms and instructions through its Federal Tax Forms CD-ROM. The CD will be available for the upcoming filing season. Order Pub. 1796, IRS Federal Tax Products CD-ROM, by using the IRS's Internet web site at wwwirs.gov/cdorders or by calling 1-877 - CDFORMS (1-877-233-6767).

Section 5. Effect On Other Documents

.01 Rev. Proc. 2002-53, 2002-31 I.R.B. 253, dated August 5, 2002 (reprinted as Publication 1141, Revised 8-2002), is superseded.

List of Exhibits